New Fast-Fix Xtreme Ultra Strong is the flagship of the Fast Fix range and is our strongest adhesive available in an aerosol. It can resist temperatures up to 125°C+ without softening and has a bond strength comparable to our brush-on contact adhesives systems.
Fast Fix Xtreme Ultra Strong can be used in a wide range of applications including:
Van Conversions, Marine Upholstery, Vehicle Restoration.
Fast-Fix Xtreme 125°C+ heat resistant adhesive properties are particularly suited for the bonding of difficult substrates such as:
Alcantara, Fabrics, Foam, Flooring carpet, Felts, Headlinings, Leather, Lining carpet, Rubber, Polythene and Vinyl's.
to substrates such as Hardboard, Wood, Concrete, Metal, Plastic or themselves.
How to Use
Fast-Fix Xtreme Hi-temp is extremely easy to apply, firstly ensure that surfaces to be bonded are clean, dry and free from any contaminants. Prime coat both the fabric and substrate with a light coat to seal the surface and allow a minimum of 10 minutes to dry. Apply an additional final coat to each surface in a uniform pattern from approximately 25cm (10 inches) ensuring maximum coverage and allow to dry for at least 1-2 minutes before bringing together. Press material firmly, working from the centre outwards to achieve a good bond. For best results the adhesive should be sprayed at temperatures between 15°C-25°C and stored at temperatures between 10°C-20°C. Any excess adhesive may be removed with our Solvent Cleaner.
Note: Fast-Fix Xtreme is not suitable to use on the following:
Heavily plasticized PVC vinyl.
Polystyrene.
Adhesives
Fast Fix Original
Contact Adhesive->
Datasheets
