12 Cans of Fast Fix Xtreme Hi Temperature Spray Adhesive x 500ml

£139.99

Add to Cart:



New Fast-Fix Xtreme Ultra Strong High temperature spray adhesive is the flagship of the Fast Fix range and is our strongest adhesive available in an aerosol. It can resist temperatures up to 120°C+ without softening and has a bond strength comparable to our brush-on contact adhesives systems.  

Fast Fix Xtreme Ultra Strong can be used in a wide range of applications including:

Van Conversions, Marine Upholstery, Vehicle Restoration.

Fast-Fix Xtreme 120°C+ heat resistant adhesive properties are particularly suited for the bonding of difficult substrates such as:

Alcantara, Fabrics, Foam, Flooring carpet, Felts, Headlinings, Leather, Lining carpet, Rubber, Polythene and Vinyl's.

to substrates such as Hardboard, Wood, Concrete, Metal, Plastic or themselves.


How to Use

Fast-Fix Xtreme Hi-temp is extremely easy to apply, firstly ensure that surfaces to be bonded are clean, dry and free from any contaminants. Prime coat both the fabric and substrate with a light coat to seal the surface and allow a minimum of 10 minutes to dry. Apply an additional final coat to each surface in a uniform pattern from approximately 25cm (10 inches) ensuring maximum coverage and allow to dry for at least 1-2 minutes before bringing together.  Press the materials firmly, working from the centre outwards to achieve a good bond. For best results the adhesive should be sprayed at temperatures between 15°C-25°C and stored at temperatures between 10°C-20°C. Any excess adhesive may be removed with our Solvent Cleaner.

Note: Fast-Fix Xtreme is not suitable to use on the following:

Heavily plasticized PVC vinyl.

Polystyrene.

 



Payment Banner
Product Logos